John Hanley's bender

 

 

"Hi Frank,

As promised I've finally got around to get the photo's of my finished bender to you.
 
As you can see from the photo's I've modified your design a little, the wheels on the front are from an old trolley jack and are welded so that they only come into contact with the ground when the bender is lifted above 20 degrees. This makes it much easier to move around. I've also added some small mods to the feet, this way after it's all nicely powder coated, you don't have any problems with the paint on the underside being scraped off and then having to contend with rust problems, this way it should outlast me at least.
 
 
Thank's again for all the work you put into these plans.
 
John Hanley, Melbourne, Australia"

Hit Counter

| Back | Home |